Fuji Xerox Versant 80 Press, User Manual

Page: 904 / 1019

22 Problem Solving
904
Pro
b
le
m
Solvin
g
22
Staple Jams in the Staple Cartridge
The following describes how to clear staple jams in the staple cartridge.
The following shows the reference for the procedure.
When the C3 Finisher or the C3 Finisher with Booklet Maker is installed...................................................................... 904
When the Finisher D4, Finisher D4 with Booklet, or Finisher D5 is installed ................................................................. 905
When the C3 Finisher or the C3 Finisher with Booklet Maker is installed
This section describes how to clear staple jam occurred in the staple cartridge of the C3
Finisher (optional) and the C3 Finisher with Booklet Maker (optional).
The following describes how to clear paper jams in the C3 Finisher with Booklet Maker as an
example. The procedure is the same as for the C3 Finisher .
1
Make sure that the machine has stopped, and
open the finisher front door.
2
With grasping the lever [R1] of the staple
cartridge holder, pull the staple cartridge holder
to the right, towards you.
3
With grasping the orange lever, pull out the
staple cartridge.
Note • The staple cartridge is firmly inserted. A slight
force is required to pull the cartridge out of
the finisher.
CAUTION
Be careful in removing jammed staples.