Fuji Xerox Versant 80 Press, User Manual

Page: 589 / 1019

Configuration of Store to USB
589
S
ca
n
n
e
r En
v
iro
nmen
t Set
tin
g
s
17
Configuration of Store to USB
This section describes how to configure the machine to use the Store to USB service.
Step 1 Available USB Memory Devices ...................................................................................................................................589
CentreWare Internet Services Setting Items.........................................................................................................................589
Step 1 Available USB Memory Devices
The Store to USB service allows you to directly save the scanned data to a USB 2.0 memory
device which is inserted into the USB memory slot on the control panel of the machine.
z USB 2.0 memory devices
z USB memory devices with the capacity of up to 128 GB
z USB memory devices that support FAT12, FAT16, FAT32, or VFAT (long name)
Note • USB memory devices that are encrypted with software cannot be used with the machine.
CentreWare Internet Services Setting Items
You can enable/disable the Store to USB service using CentreWare Internet Services. When
you disable the service, the Store to USB button is not displayed on the Services Home
screen, and you cannot use the service.
The Store to USB service is set to enabled by factory default.
For details on the setting items, click [Help] at the upper right corner of CentreWare Internet Services screen to see help.
For information on how to start CentreWare Internet Services, refer to "Starting CentreWare Internet Services" (P.557).
Important • To display the online help for CentreWare Internet Services, users need to have the environment to
connect to the internet. The communication fee shall be borne by you.