1 Before Using the Machine
38
Before Usi
n
g the Mac
h
in
e
1
About Documents
Usable Documents
Documents that meet the following conditions can be used.
Note
•
The document size series is set to [ISO Series] at factory shipment. When loading docu-
ments differing from the document size that is set, be sure to modify the document size
series setting.
For the setting method: "Original Size System" (P.220)
•
When scanning thick documents, set the thickness with the document thickness adjustment
lever on the document cover.
For the setting method: "Step3 Scanning Document" (P.49)
Documents that Require the Use of the Document Carrier
Use the document carrier for the following types of documents.
z
Documents that have been perforated, creased, heavily curled, or have holes
z
Documents that are stapled together
z
Documents to which glue or adhesive tape or filing strips has been stuck.
Note
•
For details about document carriers, contact your Fuji Xerox Customer Support Centre.
Precautions When Handling Documents
Observe the following precautions when handling documents.
z
The scanning area may become soiled if documents contaminated by glue or
adhesive tape, or documents on which corrective fluids have been used are placed
in the scanner. Take extreme caution when using stick-type glue or glue spray.
Soiling of the scanning area can cause black lines on the copies/prints.
z
Do not use documents that have been folded, wrinkled, perforated or had holes
punched in them. It may result in paper jams, and tearing.
z
When rolled documents are to be used, ensure that the diameter of the rolled
document is 40 mm or larger. Rolled documents with a diameter of less than 40 mm
must be flattened out at the lead edge.
z
When scanning thick documents, hold them with your hands while being scanned.
Document Size
Thickness
A0 , A1, A2, A3, A4
JIS B1 , JIS B2, JIS B3, JIS B4, JIS B5
ISO B1 , ISO B2, ISO B3, ISO B4, ISO B5
Special A0 (880x1,230mm , 860x1,210mm )
Special A1 (625x880mm, 620x871mm )
Special A2 (440x625mm, 435x620mm)
36x48" , 24x36", 18x24", 12x18", 9x12"
34x44" , 22x34", 17x22", 11x17", 8.5x11"
30x42" , 21x30", 15x21", 10.5x15"
Width 176 - 914.4mm (max. receive width 945mm)
Length 210 - 15,000mm
Forward-side output (when the U-
turn output guide is installed): 0.05 -
0.2mm
Rear-side output: 0.05 - 12.7mm
(when thicker than 0.2mm,
restricted to flat media)
