Fuji Xerox DocuWide 6035 User Manual Download Page 272

Page: 272 / 290

Appendix

270

pe
nd
ix

Scan Function

Item

Description

Type

Monochrome scanner/color scanner

Scanning Size

Width: 176 to 914.4 mm
Length: 210 to 15,000 mm (600 dpi)

Up to 7,500 mm for color scan

Important •

The maximum length may be restricted depending on the software
used.

Scanning Resolu-
tion

600 x 600 dpi

Scanning Halftone Monochrome: Black and white, halftone, 256 levels of gray

Full color

: 256 levels of each red, green and blue color channel.

Scanning Mode

Text/Line, Text/Photo, Picture, Photo, Transparent, Blueprint, Uneven-
toned background

Scanning Speed

The following speeds can be selected:
Monochrome: Normal (152.4mm/sec), Low speed (76.2mm/sec),

Super low speed (25.4mm/sec)

Full color

: Normal (50.8mm/sec)

, Low speed (25.4mm/sec)

Connectivity

Ethernet (10BASE-T/100BASE-
TX/1000BASE-T)

USB2.0 (max. 5 meters)

Protocol

TCP/IP, HTTP

File Format

Format

: TIFF, PDF, XDW, JFIF(JPEG)

Compression Type: MMR (for monochrome scanning), JPEG (for color

scanning)

File Storing

Save to mailbox
(Network scanning)

Save to PC
(Direct scanning)

Driver

Wide Format Network TWAIN
Source

Wide Format USB TWAIN Source

: This is an option. The separately sold color scan software key must be installed.

: The maximum length may be restricted depending on the applications used.

: For direct scanning, the output format differs depending on the applications used.

Summary of Contents for DocuWide 6035


































































































































































































































































































Search results

Summary of Contents for DocuWide 6035

Reviews:

Related manuals for DocuWide 6035

Brands by name

Popular brands

Fuji Xerox DocuWide 6035, User Manual

Search results

Summary of Contents for DocuWide 6035

Reviews:

Related manuals for DocuWide 6035

Brands by name

Popular brands