
64
6 Problem Solving
H
ardware Problems
Before concluding that your scanner has malfunctioned, check the following table to see if you can resolve
your problem.
Symptom
Cause
Remedy
The scanner will not
switch on.
Is the power switched on?
Switch on the power.
Refer to
• "Connecting and Switching On the
Is the power cord plugged into the
power outlet?
Switch the power off, firmly plug in the
power cord, and then switch the
power back on.
Refer to
• "1 Installing the Scanner" (P. 14)
Is the power cord plugged into the
power cord connector?
If the power of correct voltage
being supplied?
Connect the scanner to a power outlet
that supplies correct voltage.
• "Safety Notes" (P. 9)
The touch panel is too
dark.
Is the <Low Power> button lit?
The scanner is in the Power Saver
mode. Press the <Low Power> button
on the control panel to exit the Power
Saver mode.
Refer to
•
"1.4 Setting/Exiting the Power
Saver Mode” in the User Guide.
The scanner will not
scan or copy.
Is a message displayed on the
touch panel?
Follow the message to remedy the
problem.
Is the power cord plugged into the
power cord connector?
Switch the power off, firmly plug in the
power cord, and then switch the
power back on.
Refer to
• "1 Installing the Scanner" (P. 14)
If the scanner will not scan while
using the Scan to E-mail or Scan
to PC feature, is the network
cable plugged in?
Plug the network cable firmly into the
connector.
Refer to
• "1 Installing the Scanner" (P. 14)
If the scanner will not make cop-
ies, is the USB cable connecting
the scanner with the printer
plugged in?
Plug the USB cable firmly into the con-
nector.
Refer to
• "1 Installing the Scanner" (P. 14)