Fuji Xerox DocuPrint P505 d, User Manual

Page: 114 / 279

CentreWare Internet Services
114
Cen
tre
Ware
In
tern
et Se
rv
ic
es
7

Device Email
Enter the E-mail address of the machine with up to 128 ASCII characters.

SMTP Server
 [Server Address]
Opens the screen to set the SMTP server address.
Enter the address manually or click [Select Server from List] to search the SMTP server to
set the server address.
 [Outgoing SMTP Port Number]
Enter a port number in the range from 1 to 65535.
The default value is 25.
Note
 Do not use the numbers assigned to the other ports.

Connection Security
Set the SSL / TLS communication for SMTP.

Outgoing SMTP Authentication
 [SMTP Authentication]
Select the authentication method for sending e-mails.
Note

AUTH GSSAPI (only for Kerberos), AUTH NTLMv2, AUTH NTLMv1, AUTH PLAIN, AUTH-LOGIN, or AUTH
CRAM-MD5 can be used as an authentication method.

[SMTP AUTH User Name]
Enter the user name for verification purposes at the SMTP server with up to 64
characters.
 [SMTP AUTH Password], [Retype Password]
Enter the password for verification purposes at the SMTP server. Up to 64 single-byte
characters are allowed.
SNMP

Port
Select this to use SNMP, when you use any web applications to control the machine on the
network.

Send Authentication Error Traps
Select this to notify authenticate error traps.

SNMPv1/v2
Select this to change the settings for [SNMPv1/v2].

Enable (Read)
Select this to enable SNMPv1/v2 read access.

Write
Select this to enable SNMPv1/v2 write access.