Fuji Xerox DocuPrint P455 D, User Manual

Page: 232 / 302

232
Troubleshooting

Vertical Blanks
Problem Action
The printed result has vertical
blanks. Clean the rear side of the drum cartridge with a dry cloth.
See also:
• "Replacing the Drum Cartridge" on page 257
If the problem persists, ensure the light path is not covered.
Ensure the light path is not covered.
1 Remove the drum cartridge, and keep it in the dark place.
See also:
• "Replacing the Drum Cartridge" on page 257
2 Check the light path, and then remove the shielding.
3 Re-install the drum cartridge.
See also:
• "Installing a Drum Cartridge" on page 260
If the problem persists, replace the drum cartridge if you have a spare cartridge.
Replace the drum cartridge if you have a spare cartridge.
See also:
• "Replacing the Drum Cartridge" on page 257
• "Installing a Drum Cartridge" on page 260
If the problem persists, replace the fusing unit as instructed in "Replacing the Fusing
Unit, Transfer Unit, Retard Roll, Feed Roll and Nudger Roll" on page 261 .
Replace the fusing unit if you have a spare unit.
See also:
• "Replacing the Fusing Unit, Transfer Unit, Retard Roll, Feed Roll and Nudger
Roll" on page 261
If the problem persists, contact the Fuji Xerox local representative office or an
authorised dealer.