Fuji Xerox DocuPrint P115 w Page 45 User Manual Download

Page: 45 / 81

General Information

The LED indications shown in the table below are used in the illustrations in this chapter.

LED is off.

LED is on.

LED is dimmed.

LED is blinking.

LEDs

Machine Status

Sleep

The machine is in Sleep Mode (Power Save mode). While the machine is in Sleep Mode, the

Ready

LED

( ) is dimmed, but the machine can still receive data. Receiving a print job will automatically wake up
the machine to start printing.

For more information, see

Sleep Time

on page 46.

Deep Sleep

The machine is in Deep Sleep Mode, reducing more power consumption than Sleep mode. While the
machine is in Deep Sleep Mode, the

Ready

LED ( ) is dimmed, but the machine can still receive data.

Receiving a print job will automatically wake up the machine to start printing.

For more information, see

Deep Sleep mode

on page 46.

Ready

The machine is ready to print.

Printing

The machine is printing.

The

Ready

LED ( ) will blink in 0.5 second intervals.

Please Wait

The machine is warming up.

The

Ready

LED ( ) will blink in 1 second intervals.

Cooling Down

The inside of the machine is extremely hot. The machine will pause its current print job and go into
Cooling Down mode. Wait until the machine is in Ready mode.

The

Ready

LED ( ) will blink in 1 second intervals.

Receiving Data

The machine is either receiving data from the computer or processing data in the memory.

The

Ready

LED ( ) will blink in 0.5 second intervals.

Summary of Contents for DocuPrint P115 w

















































































Search results

Summary of Contents for DocuPrint P115 w

Reviews:

Related manuals for DocuPrint P115 w

Brands by name

Popular brands

Fuji Xerox DocuPrint P115 w, User Manual

Search results

Summary of Contents for DocuPrint P115 w

Reviews:

Related manuals for DocuPrint P115 w

Brands by name

Popular brands