manualshive.com logo in svg

Fuji Xerox DocuPrint M255 df, User Manual

Share
Download
Fuji Xerox DocuPrint M255 df User Manual Download Page 404

404

Maintenance

Ordering Supplies

The toner cartridge needs to be ordered occasionally. The toner cartridge includes installation 
instructions on the box.
This section includes:

• "Consumables" on page 404
• "When to Order a Toner Cartridge" on page 404
• "Recycling Supplies" on page 405

„

Consumables

IMPORTANT: 

•

Use only consumables we recommend. Use of any consumables other than recommended can impair 
machine quality and performance.

IMPORTANT: 

•

The number of printable pages are applicable when A4 plain paper SEF (

) is used and printing is done 

continuously in the print ratio of 5% in image density. Also, it satisfies the public values on the basis of JIS 
X6931 (ISO/IEC 19752). These values are estimates and vary depending on conditions such as the content 
being printed, paper size, paper type, the printer’s operating environment, initializing process done when you 
turn on or off the printer, and adjustments to maintain print quality.

NOTE: 

•

The printable number of pages for the starter toner cartridge shipped with the printer is approximately 1,000 
pages on DocuPrint M255 z and 2,500 pages on DocuPrint M255 df.

•

Each toner cartridge includes installation instructions on the box.

„

When to Order a Toner Cartridge

The LCD panel displays a warning when the toner cartridge nears its replacement time. Verify that you 
have a replacement at hand. It is important to order a toner cartridge when the message first appears 
to avoid interruptions to your printing. The LCD panel displays an error message when the toner 
cartridge must be replaced.
To order a toner cartridge, contact our local representative office or authorized dealer.

IMPORTANT: 

•

This printer is designed to provide the most stable performance and print quality when used with the 
recommended toner cartridge. Not using the toner cartridge recommended for this printer degrades the 
performance and printing quality of the printer. You could also incur charges if the printer breaks down. To 
receive customer support and achieve the optimum performance of the printer, be sure to use the 
recommended toner cartridge.

Product Name

Product Code

Description

Toner Cartridge

CT201918

Available for DocuPrint M255 z and capable of printing 
approximately 2,500 pages.

Toner Cartridge

CT201919

2-in-1 package of CT201918

Toner Cartridge

CT201920

Available for DocuPrint M255 df and capable of printing 
approximately 2,500 pages.

Toner Cartridge

CT201921

2-in-1 package of CT201920

Summary of Contents for DocuPrint M255 df








































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands