Fuji Xerox DocuPrint CP215 Series, User Manual

Page: 179 / 246

Troubleshooting 179
 Jam Problems
Misfeed jam
NOTE:
• If the problem continues even though you have taken suggested actions described above, contact the Fuji
Xerox local representative office or an authorized dealer.
Multi-feed jam
NOTE:
• If the problem continues even though you have taken suggested actions described above, contact the Fuji
Xerox local representative office or an authorized dealer.
Problem Action
Print media misfeeds occur. Remove the paper from the priority sheet inserter, and then make
sure that the paper is properly inserted in the multipurpose feeder.
Depending on the print media you use, take any of the following
actions:
• For thick paper, use the one that is 163 gsm or less.
• For thin paper, use the one that is 60 gsm or more.
• For the envelope, make sure that it is properly loaded in the
multipurpose feeder or the priority sheet inserter as instructed in
"Loading Envelope in the Multipurpose Feeder" on page 117 or
"Loading Envelope in the Priority Sheet Inserter" on page 123 .
If the envelope is deformed, correct it or use another envelope.
If performing manual duplex printing, make sure that the print media
is not curled.
Fan the print media.
If the print media is damp, turn over the print media.
If the problem continues, use print media that is not damp.
Problem Action
Print media multiple feeds occur. Remove the paper from the priority sheet inserter, and then make
sure that the paper is inserted properly in the multipurpose feeder.
If the print media is damp, use print media that is not damp.
Fan the print media.