manualshive.com logo in svg

Fuji Xerox DocuPrint CP205 w, User Manual

Share
Download
Fuji Xerox DocuPrint CP205 w User Manual Download Page 195

Troubleshooting

194

„

Jam Problems

This section includes:

• "Misfeed jam" on page 194
• "Multi-feed jam" on page 194

Misfeed jam

NOTE: 

•

If the problem continues even though you have taken suggested actions described above, contact the Fuji 
Xerox local representative office or an authorised dealer.

Multi-feed jam

NOTE: 

•

If the problem continues even though you have taken suggested actions described above, contact the Fuji 
Xerox local representative office or an authorised dealer.

Problem

Action

Print media misfeeds occur.

Remove the paper from the PSI, and then ensure that the paper is 
properly inserted in the MPF.

Depending on the print media you use, take any of the following 
actions:

•

For thick paper, use the one that is 216 gsm or less.

•

For thin paper, use the one that is 60 gsm or more.

•

For the envelope, ensure that it is properly loaded in the MPF or 
the PSI as instructed in 

"Loading Envelope in the Multipurpose 

Feeder (MPF)" on page 129

 or 

"Loading Envelope in the Priority 

Sheet Inserter (PSI)" on page 136

.

If the envelope is deformed, correct it or use another envelope.
If performing manual duplex printing, ensure that the print media is 
not curled.
Fan the print media.
If the print media is damp, turn over the print media.
If the problem continues, use print media that is not damp. 

Problem

Action

Print media multiple feeds occur.

Remove the paper from the PSI, and then ensure that the paper is 
inserted properly in the MPF.

If the print media is damp, use print media that is not damp.
Fan the print media. 

Summary of Contents for DocuPrint CP205 w

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands