Fuji Xerox DocuPrint CM215 b User Manual Download Page 89

Page: 89 / 418

Printer Connection and Software Installation

Configuring Printer and Installing Software on

Windows

This section includes:

• "Identifying Print Driver Pre-install Status (for Network Connection Setup) (DocuPrint CM215

• "Using Installer to Set Up Connection and Install Software" on page 91
• "Using Installer to Install Software" on page 94
• "Installing the XML Paper Specification (XPS) Print Driver" on page 95
• "Setting Up for Web Services on Devices (WSD) (DocuPrint CM215 f/CM215 fw Only)" on

page 105

• "Setting Up for Shared Printing (DocuPrint CM215 f/CM215 fw Only)" on page 108



Identifying Print Driver Pre-install Status (for Network
Connection Setup) (DocuPrint CM215 f/CM215 fw Only)

Before installing the print driver on your computer, check the IP address of your printer and change
the firewall settings.
This section includes:

• "Checking the IP Address for Your Printer" on page 89
• "Changing the Firewall Settings Before Installing Your Printer" on page 90

Checking the IP Address for Your Printer

Press the

System

button.

Select

Report / list

, and then press the

button.

Select

System Settings

, and then press the

button.

The System Settings page is printed.

Find the IP address under

Wired Network

Wireless Network

on the System Settings page.

If the IP address is

0.0.0.0

, wait for a few minutes to resolve the IP address automatically, and

then print the System Settings page again.

If the IP address is not resolved automatically, see

"Assigning an IP Address Manually" on

page 85

Summary of Contents for DocuPrint CM215 b


































































































































































































































































































































































































































Search results

Summary of Contents for DocuPrint CM215 b

Reviews:

Fuji Xerox DocuPrint CM215 b, User Manual, Page: 89 / 418

Search results

Summary of Contents for DocuPrint CM215 b

Reviews: