Fuji Xerox DocuPrint CM215 b User Manual Download Page 225

Page: 225 / 418

Scanning

225



Sending the Scanned File to the Network

Load the document(s) facing up with top edge in first into the ADF or place a single document
facing down on the document glass.

Press the

Scan

button.

Select

Scan to Network

, and then press the

button.

Select

Scan to

, and then press the

button.

Select

Computer(Network)

Server(FTP)

, or

Search Address Book

, and then press

the

button.

Computer(Network)

: Stores the scanned image on the computer by using the SMB protocol.

Server(FTP)

: Stores the scanned image on the server by using the FTP protocol.

Search Address Book

: Select the server address registered in Address Book.

Select the destination to store the scanned file in, and then press the

button.

Select scanning options as required.

Press the

(

Start

) button to send the scanned files.

Summary of Contents for DocuPrint CM215 b


































































































































































































































































































































































































































Search results

Summary of Contents for DocuPrint CM215 b

Reviews:

Fuji Xerox DocuPrint CM215 b, User Manual, Page: 225 / 418

Search results

Summary of Contents for DocuPrint CM215 b

Reviews: