manualshive.com logo in svg

Fuji Xerox DocuPrint CM215 b, User Manual

Share
Download
Fuji Xerox DocuPrint CM215 b User Manual Download Page 172

172

Copying

Making Copies From the Document Glass

NOTE: 

•

A computer connection is not required for copying. 

•

For the DocuPrint CM215 f/CM215 fw, make sure that no document is in the ADF. If any document is detected 
in the ADF, it takes priority over the document on the document glass.

•

Dust on the document glass may cause black spots on the copy printout. For best results, clean the document 
glass before use. For more information, see 

"Cleaning the Scanner" on page 383

.

To make a copy from the document glass:

1

Open the document cover.

2

Place the document facing down on the document glass and align it with the registration guide on 
the top left corner of the document glass.

3

Close the document cover.

NOTE: 

•

Leaving the document cover open while copying may affect the copy quality and increase the toner 
consumption.

•

If you are copying a page from a book or magazine, lift the document cover until its hinges are caught by 
the stopper, and then close the document cover. If the book or magazine is thicker than 20 mm, start 
copying with the document cover open. 

CAUTION:

•

Do not apply excessive force to hold thick document on the document glass. It may break the 
glass and cause injuries.

Summary of Contents for DocuPrint CM215 b



































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands