44
Printer Connection and Software Installation
• Auto SSID Setup
1
Press the
System
button.
2
Select
Admin Menu
, and then press the
button.
3
Select
Network
, and then press the
button.
4
Select
Wireless Setup
, and then press the
button.
The printer automatically searches the access points on wireless network.
5
Select the desired access point, and then press the
button.
If the desired access point does not appear, see "Manual SSID Setup" on page 44.
NOTE:
•
Some hidden SSID may not be displayed. If the SSID is not detected, turn on SSID broadcast from the access point.
6
Enter the passphrase or WEP key.
When the encryption type of the access point selected in step
5
is WPA2 or Mixed:
•
Enter the passphrase, and then press the
button.
When the encryption type of the access point selected in step
5
is WEP:
•
Enter the WEP key, and then press the
button.
NOTE:
•
A passphrase is an encryption key for WPA and WPA2 encryption which consists of 8 to 63 alphanumeric (and 64
hexadecimal) characters. It may be described as a key on some access points or routers. For details, refer to the manual
supplied with the access point or router.
When the Auto SSID Setup is successful, the
(
Wi-Fi
) LED lights up. The wireless connection is established
and setup for wireless LAN is complete.
• Manual SSID Setup
1
Press the
System
button.
2
Select
Admin Menu
, and then press the
button.
3
Select
Network
, and then press the
button.
4
Select
Wireless Setup
, and then press the
button.
5
Select
Manual Setup
, and then press the
button.
6
Enter the SSID, and then press the
button.
7
Select the network mode from
Infrastructure
and
Ad-hoc
depending on your environment, and then
press the
button.
8
Select the encryption type from
Mixed Mode PSK
,
WPA2-PSK-AES
, or
WEP
.
IMPORTANT:
•
Be sure to use one of the supported encryption types to protect your network traffic.
NOTE:
•
If you have selected
Ad-hoc
for the network mode,
WEP
is the encryption type.
To use Mixed Mode PSK or WPA2-PSK-AES encryption:
a
Select
Mixed Mode PSK
or
WPA2-PSK-AES
, and then press the
button.
b
Enter the passphrase, and then press the
button.
