Fuji Xerox DocuPrint 5105 d, User Manual

Page: 189 / 419

5.2 Common Menus Setting
189
[Printer Settings]
The [Printer Settings] menu allows you to set paper trays and the Auto Tray Selection feature.
Note
• Refer to "Auto Tray Selection Feature" (P. 139) for more information about the Auto Tray Selection feature.
[Substitute Tray]
[PaperTypeMismatch]
Printer Settings
Substitute Tray
Setting Description
Substitute Tray Sets whether or not to switch to another paper tray if the paper tray selected by the
Auto Tray Selection feature runs out of paper. When using this feature, set the
paper size for the substitute tray.
• [Off] (default)
Does not substitute the tray, and displays a message prompting to load paper
into the paper tray.
• [Use Larger Size]
Switches to another paper tray that contains paper that is one size larger than
the size requested, and prints documents at 100% zoom ratio.
• [Use Closest Size]
Switches to another paper tray that contains paper of size closest to the size
requested, and prints documents at a reduced zoom ratio if necessary.
• [Select Tray 5]
Switches to the bypass tray, and prints documents on the paper loaded in the
bypass tray.
Note
• These settings will be overridden by requests sent from computers.
Printer Settings
PaperTypeMismatch
Setting Description
PaperTypeMismatch Sets the action to take when there is no paper tray loaded with the paper type
specified in the print job.
• [PaperSupply Screen]
The message prompting you to change the settings for type of paper is
displayed.
• [ConfirmationScreen] (default)
The message prompting you to make sure the type of paper is displayed.
• [Print]
The print job is proceeded with the currently specified paper type without
showing any messages.