Fuji Xerox Document Centre C250 User Manual Download Page 532

Page: 532 / 556

17 Appendix

530

App

ndix

Not Automatically Printing an Activity Report

UserID input

[System Settings]

[Common Settings]

[Reports]

[Activity Report]

[Auto Print Off]

For more information, refer to "Activity Report" (P.267).

Changing the Output Destination for Received Documents

UserID input

[System Settings]

[Fax Mode Settings]

[File Destination / Output Destination]

[Output Destination - Line Setup]

For more information, refer to "Output Destination - Line Setup" (P.308).

Changing the Output Paper for Received Documents

UserID input

[System Settings]

[Fax Mode Settings]

[Fax Control]

[Receiving Paper Size]

For more information, refer to "Receiving Paper Size" (P.306).

Changing the Volume When Receiving

UserID input

[System Settings]

[Common Settings]

[Audio Tones]

[Ringing Volume]

For more information, refer to "Ringing Volume" (P.257).

Changing the Number of Phone Rings

UserID input

[System Settings]

[Fax Mode Settings]

[Fax Control]

[Auto Switch Attempts]

For more information, refer to "Auto Switch Attempts" (P.305).

Allowing Different Sizes of Original to be Loaded by Default

UserID input

[System Settings]

[Fax Mode Settings]

[Fax Defaults]

[Mixed Size Originals]

[Yes]

For more information, refer to "Mixed Size Originals" (P.303).

Summary of Contents for Document Centre C250












































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Document Centre C250

Reviews:

Related manuals for Document Centre C250

Brands by name

Popular brands

Fuji Xerox Document Centre C250, User Manual

Search results

Summary of Contents for Document Centre C250

Reviews:

Related manuals for Document Centre C250

Brands by name

Popular brands