Fuji Xerox Document Centre C250, User Manual

Page: 279 / 556

Copy Mode Settings
277
Setups
11
Reduce/Enlarge - 3rd Button
For the five feature buttons appearing in [Reduce/Enlarge] in the [Basic Copying Tab]
screen, you can set the magnification for the third row from the top.
You can select the magnification from the registered R/E Preset buttons.
For information about R/E Preset buttons, refer to "Reduce/Enlarge Presets" (P.284).
Note • When the [5 Features] setting is made in [Features Allocation], for [Reduce/Enlarge] in the
[Basic Copying Tab] screen, the five feature buttons do not appear.
Reduce/Enlarge - 4th Button
For the five feature buttons appearing in [Reduce/Enlarge] in the [Basic Copying Tab]
screen, you can set the magnification for the fourth row from the top.
You can select the magnification from the registered R/E Preset buttons.
For information about R/E Preset buttons, refer to "Reduce/Enlarge Presets" (P.284).
Note • When the [5 Features] setting is made in [Features Allocation], for [Reduce/Enlarge] in the
[Basic Copying Tab] screen, the five feature buttons do not appear.
Copy Defaults
This sets the default settings of copy feature settings. When the power is turned on or
the machine returns from a power-saving state, or the <Clear All> button is pressed,
these default settings take effect. By setting the defaults to commonly used features,
you can reduce the number of setting operations required in use.
1
Select [Copy Defaults].
2
Select the item to be set or
changed, and select [Change
Settings].
Note • Select [ ] to display the
previous screen and select
[
] to display the next screen.
3
Select the setting value.
4
Select [Save].
Paper Supply
Set the default value for [Paper Supply] in the [Basic Copying] screen.
When the default value of [Reduce/Enlarge] is set to [Auto %], for [Paper Supply] it is
not possible to set [Auto].
Reduce/Enlarge
Set the default value for [Reduce/Enlarge] in the [Basic Copying Tab] screen.
Select the magnification from the seven buttons registered as R/E Preset buttons,
[100%], and [Auto %], a total of nine possibilities.
When the default setting for [Paper Supply] is [Auto], for [Reduce/Enlarge] it is not
possible to set [Auto %].
For information about R/E Preset buttons, refer to "Reduce/Enlarge Presets" (P.284).