Fuji Xerox Document Centre C250, User Manual

Page: 124 / 556

4 Fax
122
Fax
4
Scan Size (Specifying the Scan Size for the Original)
You can specify the scan size before sending a fax.
If you wish to scan at a size other than that of the loaded document, specify the scan
size.
When the scan size is specified, the document is scanned at the specified size
regardless of the actual size of the loaded document. The feature allows you to add a
margin to or delete excess space from the actual image that is transmitted.
Note • The default values for buttons other than the [Auto Size Detect] button can be changed in
the System Administration mode. For information about how to change the default values,
refer to "Scan Size Defaults" (P.298).
• When the scan size cannot be detected automatically, a message prompting the scan size
to be input appears.
1
Select [Scan Size] on the [Scan
Options] screen.
2
Select the desired scan size.
„
Auto Size Detect
Scan sizes are detected automatically. The machine can detect the following document
sizes.
„
Standard Size
You can select the document size from preset sizes.
Mixed Size Originals (Scanning Different Size Originals Simultaneously)
You can simultaneously scan different size documents at their respective sizes.
Important • You can only use this feature when documents are loaded in the document feeder.
• Originals may not be scanned correctly if the top-left corners are not aligned properly.
• Always load the A5-size documents vertically.
• When loading a B5 size document with A3 or A4 size documents in a vertical direction, place
the B5 document also in a vertical direction.
Note • This feature may not be displayed depending on the model of machine you are using. This
feature is optional. For more information, contact our Customer Support Center.
• Remove any paper clips or staples.
• The [Mixed Size Originals] default value can be changed in the System Administration
mode. For information about how to change the default value, refer to "Mixed Size Originals"
(P.303).
• Be sure to set [Scan Size] on the [Scan Options] screen to [Auto Size Detect] when using
mixed size documents.
• If the document size cannot be detected, a screen to input the document size appears.
Document feeder Document glass
Original sizes that can
be detected
automatically
B5 , B4, A5 , A4, A4 ,
A3, 8.5 × 11 inches
B6, B6 , B5, B5 , B4, A6,
A5, A5 , A4, A4 , A3, 8.5
× 11 inches , 8.5× 13
inches, 8.5 × 14 inches