Fuji Xerox DocuCentre S2220, User Manual

Page: 198 / 311

9 Tools
198
Tools
9
You can select [20 seconds], [30 seconds], [60 seconds], or [90 seconds].
[30 seconds] is set at the time of factory shipment.
Job Cancel
Sets whether the machine automatically cancel the job when an error occurs.
You can select [On] or [Off]. If [On] is selected, you can set a value between 60 and 5940
seconds (in 1 second increments).
[600 seconds] is set at the time of factory shipment.
Clock
Sets the time on the machine's system clock. This item sets the clock used to print the
current time on the reports.
Note • This item can only be set when the Fax Kit or Network Kit is installed.
• When setting the time for the first time, first set the [Date Format] and [Time Format].
Follow the steps below to make the settings.
Date & Time
Set the current date and time.
You can select from UTC -12:00 to +13:00.
[UTC -5:00] is set at the time of factory shipment.
1
In the [System Settings] screen, select [Clock],
and then press the <OK> button.
For information on how to display the [System Settings] screen,
refer to "System Settings Procedure" (P.162)
2
Select [Date & Time], and then press the <OK>
button.
3
Select Time Zone, and then press the <OK>
button.
Note • You can select a value between [UTC -12:00]
and [UTC +13:00] for Time Zone.
4
Set the date.
Use the numeric keypad (buttons 0 to 9) to enter
the date.
Job Cancel... 600 seconds
Clock...
System Settings
Idle Timeout... 30 seconds
Date Format... yy/mm/dd
Time Format... 24H
Clock
Date & Time...
UTC -11:00
UTC -10:00
Time Zone [OK]:Next Screen
UTC -12:00
Date [OK]:Next Screen
1900 / 1 / 1