Fuji Xerox DocuCentre S2220, User Manual

Page: 195 / 311

Fax Settings
195
Tools
9
Enable Auto Print
The machine automatically prints transmission results after every 50 faxes sent/received.
Note • The maximum number of saved transmission logs is 100 for sent logs and 300 for received logs.
When Enable Auto Print is set to On, fax transmission is disabled when the number of saved
documents in either the sent or receive log exceeds the maximum number of saved logs if the report
cannot be printed due to the machine being out of paper or a similar issue. If sending or receiving
faxes again, manually print an Activity Report.
For information on how to print an Activity Report manually, refer to "Printing Reports/Lists" (P.215).
Disable Auto Print
The machine does not print transmission results.
Note • This cannot be selected if the number of faxes sent or received exceeds 40.
Transmission Report
Sets the machine's transmission result printing operation after sending a fax.
[Print On Error] is set at the time of factory shipment.
Note • The Transmission Report cannot be printed manually.
Always Print
The machine prints the transmission result after sending each fax.
Print On Error
The machine prints the transmission result when fax transmission fails.
Never Print
The machine does not print the transmission result regardless of whether fax transmission
succeeds or fails.
Broadcast Report
Sets the operation to print machine's transmission result after sending a fax "broadcast"
(the same fax sent to multiple recipients at once).
[Always Print] is set at the time of factory shipment.
Note • The Broadcast Report cannot be printed manually.
Always Print
The machine prints the transmission result after sending each fax broadcast.
Print On Error
The machine prints the transmission result when transmission to one or more of the
recipients in the broadcast fails.
Never Print
The machine doesn't print the transmission result regardless of whether fax transmission
succeeds or fails.