Fuji Xerox DocuCentre S1810, User Manual

Page: 37 / 202

Using CentreWare Internet Services
37
E
n
vi
ro
n
m
e
n
t Se
ttings
2
„ Machine Name
You can enter the printer name (between 1 and 32 ASCII code characters excluding
colons (:), equal signs (=), at symbols (@), or asterisks (*), which are not valid).
„ Location
You can enter the machine's location (up to 255 ASCII code characters).
„ Contact Person
You can enter the contact person's information (up to 255 ASCII code characters).
„ Administrator's E-mail Address
You can enter the e-mail address of the system administrator (up to 128 characters).
„ Comment
You can enter machine comments (up to 255 ASCII code characters).
„ Apply button
You can apply changes by pressing this button.
Energy Saver Settings (General Setup)
„ Time to Low Power Mode
You can set the time elapse from the last operation until the machine enters Low Power
mode. You can set a value between 1 and 60 minutes. (Default: 1)
„ Time to Sleep Mode
You can set the time elapse from Low Power mode until the machine enters Sleep
mode. You can set a value between 1 and 239 minutes. (Default: 1)
„ Apply button
You can apply changes by pressing this button.
Internet Services Settings (General Setup)
„ Display Language
You can change the screen display language. You can select from English, Simplified
Chinese, Traditional Chinese or Korean. (Default: English)
„ Apply button
You can apply changes by pressing this button.
Port Settings (Connectivity)
„ Port
You can activate or deactivate communication ports. You can select from SNMP, LPD, and
Port9100. Activate each port by checking its checkbox.
„ Apply button
You can apply changes by pressing this button.
Note • Reboot machine to enable new settings.