Fuji Xerox DocuCentre S1810, User Manual

Page: 102 / 202

6 Scan
102
Sc
an
6
Scanning Procedure
The basic flow of scan operations including placing the document in the machine and
setting advance settings is detailed below.
Important • The machine supports the scan feature using the USB connection. Scanning using a
network is not supported.
• The monochrome binary scan only.
Placing the Document
The following two methods are available to load documents.
„ Document feeder
z
Single sheet
z
Multiple sheets
„ Document glass
z
Single sheet
z
Bound documents, such as book
Note • The document feeder is not available for some models. An optional component is required.
Contact your local Fuji Xerox representative.
Document Feeder
„ Supported document sizes
You can place documents of the standard sizes in the document feeder.
When a document is placed in the document feeder, the machine detects the document
size automatically. The following standard size documents are detected automatically:
A5 , A4 , A4 , A3 , B5 , B5 , B4 , 8.5 × 11" , 8.5 × 11" , 8.5 × 13" , 8.5
× 14" , 11 × 17" , 16K , 16K , and 8K .
Note • You can select one of the following alternative document sizes. For more information, refer
to "System Settings" (P.116).
• 8.5 × 13" or 8.5 × 13.4"
• 8.5 × 13" or 8.5 × 14"
• B5 or 16K
„ Selectable document sizes in the scan driver
A3 (297 × 420 mm), A4 (210 × 297 mm), A5 (148 × 210 mm), B4 (257 × 364 mm), B5
(182 × 257 mm), 8.5 × 11", 8.5 × 14", 11 × 17", 7.25 × 10.5", and Custom.
„
Supported documents types (weights)
Documents with weights from 38 to 128 gsm (50 to 128 gsm for 2 Sided documents)
can be placed in the document feeder and scanned.