Fuji Xerox DocuCentre-IV 2060, User Manual

Page: 121 / 399

Output Format
119
Co
py
3
„ Ending Page Number
Allows you to specify the end page to add prefix text and a page number, in the range
from 1 to 999. The start page is fixed to "1".
Note • Use [+] and [-], or the numeric keypad to enter the end page number.
„ Start & End Page Numbers
Allows you to specify the start and end pages to add prefix text and page numbers, in
the range from 1 to 999.
Note • Use [+] and [-], or the numeric keypad to enter the start and end page numbers.
„ Include Covers/Separators
This option is available when you select [All Pages]. Select this check box to include
covers and separators.
„ Starting Number
You can specify a starting page number in the range from 1 to 999999999 when you
do not set [Number of Digits], or can specify a starting page number of up to the
allowable number of digits specified in [Number of Digits].
Note • Use [+] and [-], or the numeric keypad to enter the end page number.
Important • If the page number exceeds the specified value (999999999 when [Number of Digits] is not
set) during copying, the copy job will be canceled.
Watermark (Printing Control Numbers on the Background of Copies)
This feature allows you to faintly print a sequential control number in the background
of each copy page.
If you set "1" as the starting number, "1" is printed on each page of the first copy set
and "2" is printed on each page of the second set.
To prevent, for instance, the duplication of confidential documents that are to be
distributed at a conference, you can use this feature to add sequential numbers to the
copies, and associate the numbers with the conference members.
Important • When you select this feature, if the number of pages scanned by the machine exceeds the
maximum, the machine will not print the already-scanned data. In that case, follow the
instructions of the message displayed on the screen to cancel the job. The maximum
number of pages that the machine can scan is 999 pages per job.
Note • If a layout template is specified in [Apply Layout Template to Copy/Print Jobs] under [Force
Annotation] in the System Administration mode, the watermark specified here is overlapped
with the text on the layout template when printed. For information on [Force Annotation],
refer to "5 Tools" > "Common Service Settings" > "Force Annotation" in the Administrator
Guide.
• When [Force Watermark - Copy] is set to [On], [Watermark] is fixed to [On], which cannot be
changed. For more information, refer to "5 Tools" > "Common Service Settings" >
"Watermark" in the Administrator Guide.
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
1
Select [Watermark].