Fuji Xerox DOCUCENTRE-II C3000, User Manual

Page: 428 / 603

15 Maintenance
426
Ma
int
ena
nc
e
15
7
Push the top of the staple cartridge
holder down as shown.
8
Remove the tab from the new
staple cartridge as shown.
9
Insert the staple cartridge into the
machine until you hear it click into
place
.
10
Close the front cover of the finisher.
Note • A message will be displayed and the machine will not operate unless the front cover is
completely closed.
Replacing the Staple Cartridge (For A Finisher)
When the A Finisher (optional) is installed and it is time to replace the staple cartridge,
a message appears on the touch screen. When this message appears, load a new
staple case into the staple cartridge.
Important • The use of staple cartridges not recommended by Fuji Xerox may impair quality and
performance. Use only staple cartridges recommended by Fuji Xerox.
Note • To order a new staple cartridge, contact our Customer Support Center.
1
Make sure that the machine has
stopped, and open the front cover
of the finisher.