Fuji Xerox DOCUCENTRE-II C3000, User Manual

Page: 355 / 603

Login Setup/Auditron Administration
353
Sy
st
em Set
tin
gs
11
1
Select [Login Setup/Auditron
Mode].
2
Select any item.
Off
No user login setup/auditron administration is required to operate the machine.
Note • When [Off] is selected, [Auditron Mode] and [Mailbox Access] are disabled even if they are
set to [On].
Local Machine Access
Carries out the auditron administration using the authenticated users already
registered on the machine.
For information about authentication on the machine, refer to "Authentication and Auditron
Administration" (P.403).
Network Access
Carries out the auditron administration using user information managed by the remote
accounting service. User information is registered by the remote accounting service.
For information about net authentication, refer to "Authentication and Auditron Administration"
(P.403).
Note • When [Network Access] is set in the [Login Setup/Auditron Mode] screen which appears
when the <Log In/Out> button on the control panel is pressed, you can enter the account ID.
„ Check User Details
Select whether to check user details. If [Off (Keep logon records)] is selected, [User ID] and
[Account ID] must be entered. The entered information is not verified, but is logged onto the
machine. Select [On] to verify user information.
The following items are common settings for each verification feature.
Remote Access
Verifies a remote accounting server. Can be used to manage user information
managed on a remote accounting server. User information cannot be registered on the
machine.
For information on the settings, refer to "Login Setup/Auditron Mode" (P.352).
Important • When switching to or from the remote access mode, the following information is lost.
- All user information
- Personal mailboxes and personal job flow sheets
• When a Kerberos server is used as a remote authentication server, if the time of the remote
authentication server and that of this machine differs, authentication may fail.
• Remote Access is not available when enabling [TCP/IP - IP Filter] of [Protocol Settings] in
[Network Settings] under [System Settings] on the touch screen.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
„ Guest User
Set whether to allow a user not registered with the remote authentication server to use
the machine as a guest user.
„ Guest Password
Configure the guest password as necessary. You can set the password from 4 to 12
digits.