Fuji Xerox DOCUCENTRE-II C3000, User Manual

Page: 186 / 603

5 Scan
184
Sc
an
5
Image Quality
On the [Image Quality] screen under [E-mail], [Scan to Mailbox], [Network Scanning],
or [Scan to FTP/SMB], you can set the image quality features. The following shows the
reference section for each feature.
Photographs (Scanning a Color Photograph)............................................................................184
Image Options (Adjusting Scan Density and Image Sharpness) ..............................................184
Image Enhancement (Erasing the Background Color of Documents/Adjusting contrast) .......185
Shadow Suppression (Suppressing the Document Background)..............................................185
Color Space (Specifying Color Space) .....................................................................................185
1
On the [All Services] screen, select
[E-mail], [Scan to Mailbox], or
[Scan to FTP/SMB].
2
Select the [Image Quality] tab, and
configure each feature.
Note • [Color Space] is not available for some models. An optional package is necessary. For more
information, contact our Customer Support Center. A setting must be made in the System
Administration mode to activate [Color Space]. For information on the setting procedures,
refer to "Color Space" (P.311) and "Color Space (Specifying Color Space)" (P.185).
Photographs (Scanning a Color Photograph)
Configure when scanning a color photograph.
This feature is only available when [Scanning Color] is set to [Color] in the [General
Settings] screen.
Important • When sending faxes using this feature, place the document on the document glass.
• When selecting [Photographs], [Shadow Suppression] and [Background Suppression]
feature cannot be used.
1
Select [Photographs].
2
Select [Enhance Photographs].
Image Options (Adjusting Scan Density and Image Sharpness)
You can scan with adjusting the scan density and image sharpness.
1
Select [Image Options].
2
Select [ ] and [ ] and adjust any
item.
„ Lighten/Darken
You can select from among 7 density levels between [Lighten] and [Darken].
The scan density increases the nearer the level is to [Darken] and decreases the nearer
the level is to [Lighten].