Fuji Xerox DocuCentre 1055, User Manual

Page: 184 / 245

11 Problem Solving
184
Paper Jams
When paper jams inside the machine, the machine stops, sounds an alarm, and
displays a message on the screen. Follow the instructions displayed and remove the
jammed paper.
Gently remove the paper taking care not to tear it. If paper is torn while it is being
removed from the machine, remove all the torn pieces making sure that none remain
inside. If a paper jam message is displayed again, paper is probably jammed at another
location. Clear this by following the message on the screen.
When you have finished clearing a paper jam, printing automatically resumes from the
point before the paper jam occurred.
NOTE: When removing jammed paper, make sure that no bits of paper are left in the
machine, since they could cause more jams or even fire. If a piece of paper is stuck in
a hidden area or wrapped around the fuser unit or rollers, do not remove it forcefully;
you could get injured or burned. Switch off the machine immediately, and contact our
Customer Support Center.
This section describes how to clear paper jams in the following locations.
Paper Jams in Cover A – page 185
Paper Jams in Cover B – page 187
Paper Jams in Cover C – page 187
CAUTION
Do not attempt to remove a paper jammed deeply inside the product, particularly a paper
wrapped around a fuser or a heat roller. Otherwise, it may cause injuries or burns. Switch
off the product promptly and contact your local Fuji Xerox representative.
Exit
Tray 3 (Optional)
Tray 4 (Optional)
Cover A
Tray 5 (Bypass Tray)
Cover D (Optional)
Cover B
Cover C
Tray 2 (Optional)
Tray 1
Document Exit
Document Feeder
Cover