Fuji Xerox DocuCentre 1055, User Manual

Page: 185 / 245

Paper Jams
185
Paper Jams in Cover D – page 188
Paper Jams in Exit – page 188
Paper Jams in Trays 1, 2, 3, and 4 (2–4 are Optional) – page 189
Paper Jams in Tray 5 (Bypass Tray) – page 189
Media jams happen for a variety of reasons. Check the guidelines below to reduce the
potential for jams in the machine.
• Use only recommended media. Refer to Supported Paper Sizes and Types in the
Paper and Other Media chapter on page 127 and Specifications in the Appendix
chapter on page 209 for a list of recommended media types.
• Protect unused media by storing it in its wrapper, on a flat surface.
• The orientation of the media in the paper tray must match the orientation of the
documents.
• Check the maximum fill line in the tray to make sure the paper tray is not overloaded.
• Do not use media that is torn, wrinkled, or folded.
Paper Jams in Cover A
Follow the steps below to clear paper jams in Cover A using green levers A1 and A2.
Follow the messages on the screen and remove jammed paper from the specified
location.
Green Lever A1
1.
Open Tray 5 (bypass tray) if necessary,
and then open Cover A while lifting up
the release lever.
2.
If the jammed paper is inside the fuser
unit, push down and rotate the green
lever A1 in the direction of the arrow to
feed the paper the top of the fuser unit.