Fuji Xerox ApeosPort-V C5580, Administrator'S Manual

Page: 67 / 797

Improving the Paper Feeding Performance
67
P
a
p
e
r an
d Oth
e
r M
e
dia
2
Improving the Paper Feeding Performance
The paper feeding performance can be improved when the HCF B1-S (Tray 6) is used.
If images are skewed even when paper is loaded correctly, use the following procedure so
that the paper may be fed more accurately.
Important • If you are using special media, set the paper type according to the paper loaded. For more
information, refer to "Paper Tray Attributes" (P.156).
• If any of the following types of paper is loaded in the tray, performing the procedure in this section
may cause the paper to be fed improperly, resulting in paper jams.
1
Pull out the tray towards you until it stops.
Important • While the machine is processing a job, do not
pull out the tray.
2
Slide the switch on top of the long-side paper
guide to the right until it stops.
Note • To return the switch to its original position,
slide it to the left until it stops.
3
If the paper feeding performance is not
improved after step 2, slide the switch on the
right front side towards the back of the
machine until it stops.
Important •
To return the switch to its original position,
slide it towards you until it stops.
4
Push the tray in gently until it stops.
 Heavyweight
(221 gsm or more)
 HW Reload
(221 gsm or more)
 Hole Punched Heavyweight
(221 gsm or more)
 Gloss (106 gsm or more)  Gloss Reload
(106 gsm or more)
 Tab Stock (221 gsm or more)
 Labels (106 gsm or more)  Transparency  Adhesive
CAUTION
Make sure to pull out the tray slowly.
When the tray is being pulled out with
force, the tray may possibly hit your
knees or other parts of your body
causing injuries.