Fuji Xerox ApeosPort-V C5580, Administrator'S Manual

Page: 603 / 797

Paper Jams
603
Pro
b
lem
So
lv
in
g
15
4
Return the handle [1c] to its original position.
5
Close the Transport Unit V1 front door.
Note •
A message will be displayed and the machine will not operate if the Transport Unit V1 front door is
even slightly open.
Paper Jams at the Handle [1a]
1
Make sure that the machine has stopped, and
open the Transport Unit V1 front door.
2
Move the handle [1a] to the upper direction.
3
Remove the jammed paper.
Note • If paper is torn, check for any torn pieces of
paper inside the machine.
4
Return the handle [1a] to its original position.
5
Close the Transport Unit V1 front door.
Note • A message will be displayed and the machine will not operate if the Transport Unit V1 front door is
even slightly open.
Paper Jams in C3 Finisher or C3 Finisher with Booklet Maker
The following describes how to clear staple jams inside the finisher when the C3 Finisher
(optional) or the C3 Finisher with Booklet Maker (optional) is installed.
Paper Jams at the Handle [3a] (Using the Knob [3b]) .......................................................................................................604
Paper Jams at the Handle [3c]..................................................................................................................................................605
Paper Jams at the Handle [3d] .................................................................................................................................................606
Paper Jams at the Handle [3d] (when the paper is ejected at the output area)..........................................................607
Paper Jams at the Booklet Unit [4] (For C3 Finisher with Booklet Maker).....................................................................607
Paper Jams at the Booklet Tray [4a] (For C3 Finisher with Booklet Maker) ..................................................................608