manualshive.com logo in svg

Fuji Xerox ApeosPort-V C5580, Administrator'S Manual

The Fuji Xerox ApeosPort-V C5580 is a high-performance multifunctional printer that offers advanced features. To ensure seamless operation and efficient customization, an Administrator's Manual is available for free download from manualshive.com. This comprehensive manual provides detailed instructions and insights to optimize the device's functionality and cater to specific needs.

Share
Download
background image

Paper Jams

589

Pro

b

lem

 So
lv

in

g

15

Paper Jams

If paper jams inside the machine, the machine stops and an alarm sounds. A message is also 
displayed on the touch screen. Follow the instructions displayed to remove the jammed 
paper.

Gently remove the paper taking care not to tear it. If paper is torn while it is being removed 
from the machine, remove all the torn pieces and make sure that none remain inside the 
machine.

If a paper jam message displays again after you have cleared the paper jam, paper is 
probably jammed at another location. Clear this by following the message.

When you have finished clearing the paper jam, printing automatically resumes from the 
state before the paper jam occurred. 

If a paper jam occurs during copying, press the <Start> button. Copying resumes from the 
state before the paper jam occurred.

This section describes how to clear paper jams at the following locations.

Paper Jams in Trays 1 to 2 .........................................................................................................................................................590

Paper Jams in Tray 3 ...................................................................................................................................................................590

Paper Jams in Tray 4 ...................................................................................................................................................................591

Paper Jams in Tray 5 (Bypass) ..................................................................................................................................................591

Paper Jams in Tray 6 (HCF2 (2000 sheets)) ..........................................................................................................................593

Paper Jams in Tray 6 (HCF B1-S)..............................................................................................................................................595

Paper Jams in the Transfer Module .........................................................................................................................................598

Paper Jams in the Bottom Left Door .......................................................................................................................................599

Paper jams in the Bottom Right Door .....................................................................................................................................600

Paper Jams in the Output Tray .................................................................................................................................................602

Paper Jams in the Transport Unit V1 ......................................................................................................................................602

Paper Jams in C3 Finisher or C3 Finisher with Booklet Maker...........................................................................................603

Paper Jams in the Folder Unit CD1 ..........................................................................................................................................609

Paper jams in the Finisher D2-P with Booklet Maker ..........................................................................................................612

Important •

When a paper jam occurs, paper is sometimes torn and remains inside the machine if you pull out a 
paper tray without checking the paper jam position. This may cause machine malfunctions. Check 
where the paper jam occurred first.

•

If a piece of jammed paper remains inside the machine, the paper jam message will not disappear 
from the touch screen.

•

Clear the paper jams while the machine is on. When the power is turned off, all information stored to 
the machine's memory will be erased.

•

Do not touch components inside the machine. This may cause print defects.

WARNING

If you need to pull out a tray to remove paper jam, contact your local Fuji Xerox 
representative. Do not pull out a tray, otherwise it may cause injuries.

CAUTION

Do not attempt to remove a paper deeply jammed inside the product, particularly 
a paper wrapped around the  Fusing Unit or the heat roller. Otherwise, it may cause 
injuries or burns. Switch off the product immediately and contact your local Fuji 
Xerox representative.

Summary of Contents for ApeosPort-V C5580






























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ApeosPort-V C5580

Oki C5800 Brochure & Specs preview
C5800
Brand: Oki Pages: 6
Oki C7300 Référence Matérielle preview
C7300
Brand: Oki Pages: 44
Oki C7500 Enhancements Manual preview
C7500
Brand: Oki Pages: 13
Oki C7300 Software Installation Manual preview
C7300
Brand: Oki Pages: 20
Oki C7300 Specifications preview
C7300
Brand: Oki Pages: 2
Oki C5300 Setup Manual preview
C5300
Brand: Oki Pages: 28
CAB A2+ Operating Instructions Manual preview
A2+
Brand: CAB Pages: 40
QMS Magicolor 6100 Supplementary Manual preview
Magicolor 6100
Brand: QMS Pages: 2
Canon PIXMA MG5600 Series User Manual preview
PIXMA MG5600 Series
Brand: Canon Pages: 4
Samsung SCX 4500W - Personal Wireless Laser Multi-Function... User Manual preview
SCX 4500W - Personal Wireless Laser Multi-Function...
Brand: Samsung Pages: 113
Canon imageRUNNER ADVANCE 8105 Specification preview
imageRUNNER ADVANCE 8105
Brand: Canon Pages: 5
Canon imageCLASS MF269dw Setup Manual preview
imageCLASS MF269dw
Brand: Canon Pages: 32
Samsung ML-7300N User Manual preview
ML-7300N
Brand: Samsung Pages: 158
Canon imageRUNNER ADVANCE DX C478iZ Faq Manual preview
imageRUNNER ADVANCE DX C478iZ
Brand: Canon Pages: 208
Canon imageRUNNER ADVANCE DX C477iFZ Faq Manual preview
imageRUNNER ADVANCE DX C477iFZ
Brand: Canon Pages: 92
DNP ID400 DC3 Installation Manual preview
ID400 DC3
Brand: DNP Pages: 2
Ricoh Lanier AP206 Setup Manual preview
Lanier AP206
Brand: Ricoh Pages: 406
Konica Minolta bizhub C452 Series Replacement Instructions Manual preview
bizhub C452 Series
Brand: Konica Minolta Pages: 17

Brands by name

Popular brands

Load more brands