Fuji Xerox ApeosPort-V C3320, User Manual

Page: 382 / 429

11 Job Status
382
Job St
a
tu
s
11

(Entire view)
An entire preview image is displayed.
In the entire view, the file name, Stored Date,
and Pages are displayed on the right side of the
preview area.
Double-tap the preview area to move to the
enlarged view.

(Enlarged view)
A previewed image is enlarged or reduced.
In the enlarged view, the following operations
are available.
 Drag or flick the enlarged image to move the
position to be displayed.
 Double-tap the previewed image to change
the ratio of the image size.
 Drag the slider to change the ratio of the
image size.

Print Quantity
Specify the number of print sets.

Output Color
Displays the output color of the document to be printed.

2 Sided Printing
Displays 1 Sided, Flip on Short Edge, and Flip on Long Edge.

Booklet Creation
Displays Left/Top Bind and Right/Bottom Bind.
Note • This item is displayed when the booklet layout is set using a printer driver.
• When the orientation of booklet creation cannot be detected, "Booklet Creation" is displayed only.

Print
Prints the Delayed Print job. After printing, the job is deleted. If printed manually, the job
will not be printed at the specified time.
Refer to "When [Print] is Selected" (P.382).
When [Print] is Selected
1
Select [Yes].
Note • The screen as shown on the right does not
appear if [Print Job Confirmation Screen] is
set to [Disabled] in the System
Administration mode. If [Disabled] is
selected, the machine automatically deletes
the job after printing without displaying the