Fuji Xerox ApeosPort-V 6080, Administrator'S Manual

Page: 233 / 745

Fax Service Settings
233
To
ols
5
SIP Line - Company Logo
Register the sender names for IP fax (SIP). The sender name is printed in the Transmission
Header Text or Cover Page. Enter up to 60 characters using the keyboard displayed or the
numeric keypad.
G3 SIP Line - ID
When using G3 communications, register the G3 ID for IP fax (SIP).
Specify a G3 ID with up to 20 digits using the keyboard displayed or the numeric keypad.
Internet Fax Control
You can configure the settings related to the Internet fax control.
Internet Fax Path
Set the Internet fax communication path.
„
Via E-mail Server
Sends e-mail via an SMTP server.
„
Direct (P2P)
Directly sends to the machine with the Internet Fax feature, without going through an SMTP
server.
You can specify the following two types of e-mail address for the Internet Fax feature:
z Specifying a host name
@ must be followed by FQDN.
Example: local-part@device.domain.jp
z Specifying an IP address
@ must be followed by an IP address with brackets.
Example: local-part@[192.0.2.1]
Profile for Broadcast Job
Set the default value for an Internet fax profile when performing an Internet fax broadcast
send.
A profile is specified to restrict attribute information such as image resolution and paper size
for transmissions between Internet Fax-enabled machines.
Important • The supported TIFF-file profiles vary depending on the destination Internet Fax-enabled machine.
Before specifying a profile, check the profile that the destination machine supports.
„
TIFF-S
The Internet fax standard profile. For documents larger than A4, the size is automatically
reduced to A4 when transmission.
„
TIFF-F
Select this profile when you specify [Superfine] for [Resolution] or when you send A3 or B4
documents.
„
TIFF-J
Select this profile for sending documents in JBIG.