manualshive.com logo in svg

Fuji Xerox ApeosPort-V 4070, Administrator'S Manual

The Fuji Xerox ApeosPort-V 4070 is a versatile multifunction printer designed for office use. To optimize its features, the Administrator's Manual is a comprehensive guide that can be downloaded for free from our website, providing step-by-step instructions and configuration options to enhance productivity and efficiency.

Share
Download
background image

13 Encryption and Digital Signature Settings

372

E

n

cr

y

pt

io

n

 an
d

 Di
gi

ta

l S
ign
at

ure

 S

e

tt

in

gs

13

Configuration of HTTP Communications Encryption

This section describes the settings to encrypt HTTP communications.

The following shows the reference section for each procedure.

Installation Overview.................................................................................................................................................................. 372

Step1 Configuration on the Machine ..................................................................................................................................... 372

Step2 Configuration on the Computer................................................................................................................................... 373

Installation Overview

To encrypt HTTP communications, configure the machine and your computer as follows:

„

Configuration on the Machine

Configure a certificate on the machine. No certificate is registered on the machine by 
factory default. Configure certificates for an SSL server as needed. 

z

Configuring certificates by CentreWare Internet Services

The following two methods are available depending on types of certificates.

- Create a self-signed certificate on the machine, and then enable HTTPS.
- Enable HTTPS, and then import a certificate issued by another CA to the machine.

„

Configuration on the Computer

To encrypt communications between a web browser and the machine, enter an address 
beginning with "https" instead of "http" into the address box of the web browser.

Step1 Configuration on the Machine

Configure a certificate on the machine. No certificate is registered to the machine by factory 
default. Configure certificates for an SSL server as needed. 

The following describes the procedures to set up a certificate by CentreWare Internet 
Services.

Setting up a Certificate using CentreWare Internet Services

To set up a certificate using CentreWare Internet Services, you can have the machine create 
a self-signed certificate for SSL server or can import any registered certificate (issued by 
another CA) to the machine.

For information on how to import a registered certificate, click [Help] at the upper right corner of the CentreWare Internet 
Services screen to see help.

Important •

To display the online help for CentreWare Internet Services, users need to have the environment to 
connect to the Internet. The communication fee shall be borne by you.

•

When performing SSL communications using a self-signed certificate created on the machine, or a 
certificate with which the character code is encoded with UTF-8, you will not be able to connect with 
SSL if Internet Explorer is used with Mac OS X 10.2 or later. 
This is because the operating system cannot recognize the character code (UTF-8) of the certificate. 
Use Netscape 7 in the above-mentioned OS environments.

•

You cannot import a certificate that has been already registered in [Local Device] or [Others]. Delete 
the registered certificate before importing.

1

Start CentreWare Internet Services.

For more information on how to start CentreWare Internet Service, refer to "Starting CentreWare Internet Services" (P.298).

2

Create a certificate.

Summary of Contents for ApeosPort-V 4070
















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ApeosPort-V 4070

Qls 2000 Series Operation & Setup Manual preview
2000 Series
Brand: Qls Pages: 53
Xerox 2000 Series Operation Manual preview
2000 Series
Brand: Xerox Pages: 36
Canon Pixma MG2400 Series Manual preview
Pixma MG2400 Series
Brand: Canon Pages: 2
Canon PIXMA MX922 Setting Up preview
PIXMA MX922
Brand: Canon Pages: 29
Canon PIXMA MX410 Series Network Setup Troubleshooting preview
PIXMA MX410 Series
Brand: Canon Pages: 46
Canon BJC-S9000 Quick Start Manual preview
BJC-S9000
Brand: Canon Pages: 65
Canon PIXMA MX372 Getting Started Manual preview
PIXMA MX372
Brand: Canon Pages: 4
Canon MX530 series Setting Up preview
MX530 series
Brand: Canon Pages: 2
Canon BJC-50 Datasheet preview
BJC-50
Brand: Canon Pages: 2
Canon Sure shot 80 tele Remote Ui Manual preview
Sure shot 80 tele
Brand: Canon Pages: 39
Canon BJC6500 - BJC 6500 Color Inkjet Printer Paper Manual preview
BJC6500 - BJC 6500 Color Inkjet Printer
Brand: Canon Pages: 6
Canon G600 Series Getting Started preview
G600 Series
Brand: Canon Pages: 20
Canon imagePROGRAF iPF6450 Manual preview
imagePROGRAF iPF6450
Brand: Canon Pages: 35
Canon PIXMA MX340 Series Connection Manual preview
PIXMA MX340 Series
Brand: Canon Pages: 11
Canon PIXMA MX340 Series Network Installation Manual preview
PIXMA MX340 Series
Brand: Canon Pages: 16
Canon imagePROGRAF iPF6300S Setup Manual preview
imagePROGRAF iPF6300S
Brand: Canon Pages: 12
Canon MP980 series Connection Manual preview
MP980 series
Brand: Canon Pages: 19
Canon MP980 series Quick Start Manual preview
MP980 series
Brand: Canon Pages: 101

Brands by name

Popular brands

Load more brands