Fuji Xerox ApeosPort-V 4070, Administrator'S Manual

Page: 284 / 719

5 Tools
284
Tools
5
Set the passcode after setting the system administrator's user ID. You can set the passcode
from 4 to 12 characters.
For more information about [Passcode Entry for Control Panel Login], refer to "Passcode Policy" (P.289).
1
Select [System Administrator's Passcode].
2
Select [New Passcode].
3
Enter a new passcode (4 to 12 digits) using the
keyboard displayed, and then select [Save].
Note • If no passcode is set, leave the text boxes
blank and select [Save].
4
Select [Retype Passcode], enter the same
passcode, and then select [Save].
5
Select [Save].
6
A confirmation window appears. Select [Yes] to confirm your entry.
Authentication
In [Authentication], you can set the following items.
The following shows the reference section for each setting.
Login Type ..................................................................................................................................................................................... 284
Access Control............................................................................................................................................................................... 285
Create/View User Accounts ....................................................................................................................................................... 286
Reset User Accounts.................................................................................................................................................................... 286
Create Authorization Groups .................................................................................................................................................... 286
User Details Setup ....................................................................................................................................................................... 287
Maximum Login Attempts by System Administrator.......................................................................................................... 289
Passcode Policy............................................................................................................................................................................. 289
Charge/Private Print Settings ................................................................................................................................................... 290
Receive Control............................................................................................................................................................................. 290
Login Type
Allows you to select a type of authentication.
„
No Login Required
Does not use the Authentication feature.
„
Login to Local Accounts
Authenticates users based on the user information registered on the machine.
Note • When [Login to Local Accounts] is selected, the machine enters the Login mode and [Login] is
displayed at the lower left of the Services Home screen.
„
Login to Remote Accounts (ApeosPort Series Models Only)
Authenticates users based on the user information registered on a remote authentication
server.
Note • When [Login to Remote Accounts] is selected, the machine enters the Login mode and [Login] is
displayed at the lower left of the Services Home screen.