Fuji Xerox ApeosPort-IV C4430, User Manual

Page: 75 / 393

Copy
75
Co
py
3
„ Auto %
Automatically determines the copy ratio based on the document size and the paper size
specified in [Paper Supply], and copies the document to fit into the paper.
Note • If you select [Auto %], an option other than [Auto Select] is selected in [Paper Supply].
„ Ratios (3rd and 4th buttons)
Displays preset copy ratios.
You can change the copy ratio associated with each button. For information on the settings, refer to "5
Tools" > "Copy Service Settings" > "Preset Buttons" > "Reduce/Enlarge - Button" in the Administrator
Guide.
„ More
Displays the [Reduce/Enlarge] screen on which you can set [Proportional %],
[Independent X - Y%], and [Calculator %].
For information on the settings on the [Reduce/Enlarge] screen, refer to "When [Proportional %] is
Selected" (P.75), "When [Independent X - Y%] is Selected" (P.76), or "When [Calculator %] is
Selected" (P.77).
When [Proportional %] is Selected
You can select a ratio from the standard copy ratios, or can enter a ratio directly.
1
Select a copy ratio, or specify a value.
„ Variable %
Specify a ratio in the range from 25 to 400% in 1% increments. To specify a value, use
the numeric keypad or [+] and [-]. Specifying "100 %" allows you to make copies at the
same image size as the original document.
When you make enlarged/reduced copies from standard sized documents on standard
sized paper, the following copy ratios will be applied.
How to load a document depends on the size and orientation of a document. For more information, refer
to "Step 1 Loading Documents" (P.60).
For information on paper that can be loaded, refer to "2 Paper and Other Media" > "Paper Types" in the
Administrator Guide.
A5 B5 A4
A5
100% 122% 141%
B5
81% 100% 115%
A4
70% 86% 100%
Copy
Original