Fuji Xerox ApeosPort-IV C4430, User Manual

Page: 312 / 393

8 Stored Programming
312
S
tor
ed
Pr
og
ra
mming
8
Stored Programming Overview
The Stored Programming service allows you to store settings that you expect to use
frequently and call them with a single button operation. You can also assign a screen
to a stored program button, to use the button as a short-cut to the screen.
A stored program can store not only settings of a feature, but a flow of settings
configured on multiple screens.
For example, this service is available when you want to record a procedure starting
from pressing the <Machine Status> button, to displaying the screen under [Print
Reports] to print a Job History Report.
In addition, while Build Job is running, this service can be used for the remaining
document stacks.
For information on Build Job, refer to "Build Job (Processing Documents Scanned with Different
Settings as One Job)" (P.130).
The following shows the reference section for each feature.
Registering/Deleting/Renaming Stored Programs....................................................................313
Calling a Stored Program..........................................................................................................319