Fuji Xerox apeosport-iv C3370, Administrator'S Manual

Page: 56 / 889

Paper and Other Media
56
P
a
per and
O
ther M
edia
2
Loading Paper
This section describes how to load paper.
Types of paper loaded in trays
The machine automatically detects the size and orientation of loaded paper in a tray, but
not a paper type. Normally, each tray is set to plain paper. When loading paper other than
plain paper, you must change the paper type setting. You can name paper types and can
set up to five paper types as user-defined paper.
Reference
z
For information on changing the paper type settings, refer to "Changing the Paper Settings" (P.73).
Automatic Tray Selection
If you set paper source on the [Paper/Output] tab to [Paper Tray] in the PCL print driver's
screen when printing, the machine automatically selects the paper tray according to the
size and orientation of the document to be printed. This is called [Automatic Tray
Selection].
When copying, selecting [Auto Select] for [Paper Supply] enables automatic tray selection.
If the machine detects two or more corresponding trays for the automatic tray selection,
the machine selects the tray with the highest priority specified in [Paper Type Priority]
among the trays set under [Paper Type Settings]. Trays whose [Paper Type Priority] setting
is set to [Auto Paper Off] are ignored in automatic tray selection. Also, if the [Paper Type
Priority] settings are identical, the tray priority is determined by [Paper Tray Priority].
Note
z Some trays may not be selected in automatic tray selection depending on the setting of that tray for [Auto
Paper Select]. For more information, refer to "Paper Tray Attributes" (P.175).
z
Tray 5 cannot be selected in automatic tray selection.
z
When the paper runs out during copying or printing, select a tray containing the same sized paper and
orientation, and the machine continues copying or printing (Auto Tray Switching feature). The machine
cannot switch to a tray containing a paper type for which [Paper Type Priority] is set to [Auto Paper Off].
Reference
z For information about [Paper Type], [Paper Type Priority], and [Paper Tray Priority] settings, and the paper substitute feature, refer
to "Paper Tray Settings" (P.175). You can also set these settings from CentreWare Internet Services.
Adding paper
When the machine runs out of paper during copying or printing, a message is displayed on
the touch screen. Add paper according to the message instructions. Copying or printing
automatically resumes when paper is added.
Important
z Do not add paper while the machine is in the Power Saver mode. Add paper after exiting the Power Saver
mode by pressing the <Power Saver> button, and then press the <Machine Status> button.
Note
z
Carefully fan the paper before loading it in a tray. Otherwise, the paper may stick together, resulting in paper
jams, or multiple sheets being fed to the machine simultaneously.