Fuji Xerox apeosport-IV 6080, Administrator'S Manual

Page: 93 / 705

Machine Information
93
Ma
ch
in
e St
at
u
s
4
Job Flow Error Report
This report notifies job flow errors. The date and time of the error occurred and the error
codes are printed.
You can set not to print out the Job Flow Error Report automatically.
For information on setting whether to print the report automatically, refer to "Job Flow Error Report"
(P.134).
Overwrite Hard Disk
You can check the overwriting status of the hard disk. "Overwriting" indicates that the
overwriting is in progress. "Standby" indicates that the overwriting is completed.
Note • [Overwrite Hard Disk] appears when [Overwrite Hard Disk] is enabled under [Authentication/
Security Settings]. For more information, refer to "Overwrite Hard Disk" (P.264).
1
Select [Overwrite Hard Disk].
2
Check the overwriting status of the hard disk.
Print Mode
You can print the programming settings configured in the ESC/P-K emulation mode
and retrieve the programming.
Note • The items displayed vary depending on the options installed.
1
Select [Print Mode].
2
Select [Off-line] or [On-line].
„ Off-line
The machine does not accept data from a computer. Any data being sent is cancelled
and not printed.
„ On-line
The printer accepts data from a computer.
3
Select a printer language to set a print mode.