Fuji Xerox apeosport-IV 6080, Administrator'S Manual

Page: 606 / 705

16 Appendix
606
Ap
pe
ndix
16
ESC/P-K Emulation Settings
The following tables show the basic and extended settings that can be configured on
the ESC/P-K emulation mode menu.
Basic Settings
Setting Item
Item
Number
Value
Paper tray 3 Sets the paper tray to be used for printing.
[0]
: Auto
[1] (Default) : Tray 1
[2] : Tray 2
[3] : Tray 3
[4] : Tray 4
[5] : Tray 5
[6] : Tray 6 (HCF (A4 1 Tray) or (A4 2 Tray))
[7] : Tray 7 (HCF (A4 2 Tray))
If printing from Tray 5, instruct printing and then operate the machine to
start printing. To cancel the setting, change the setting for "Tray 5
Confirmation".
Important • When Trays 1 to 4, or Trays 6 to 7 is selected, the paper size is
determined by the size of paper loaded in the tray, and thus [Paper
Size] cannot be set. Also, the paper size of for Trays 3 to 4 is fixed to
A4. To change the paper size, contact our Customer Support Center.
When [Auto] is selected and paper of the same size in the same orientation in
multiple trays is loaded, paper will be fed in the order of Tray 1
J
Tray 2
J
Tray 3
J Tray 4 J Tray 6 J Tray 7. If paper of the same size is loaded in multiple trays
but in different orientations, feeding of the paper loaded in the landscape
orientation is prioritized.