Machine Components
25
P
ro
d
u
c
t O
ver
view
2
5
Toner cover
Open this cover to replace toner cartridges.
6
Front cover
Open this cover to access the insides of the machine to clear paper
jams or replace consumables.
7
Tray 1, 2, 3, 4
Accommodates paper.
8
Bottom left cover
Open this cover to access the insides of the machine to clear paper
jams.
If the Tray 6 is installed in the machine, move the Tray 6 to the left first.
9
Locking casters
Used for locking the wheels of the machine. Lock these casters after
moving the machine to its installation site.
10
Tray 6 (optional)
Accommodates paper.
11
Tray 6 top cover
Move the Tray 6 to the left and then open this top cover to clear paper
jams.
12
Tray 5 (Bypass)
Used for loading non-standard paper (thick-stock paper, and other
special media) that cannot be loaded in the Trays 1 to 4, and 6.
13
Tray 5 (Bypass) top cover
Open the top cover to clear paper jams.
14
USB 2.0 interface
connector
Connected to a USB cable.
15
10BASE-T / 100BASE-TX
connector
Connected to a network cable.
16
Full size color UI
(When attached on the left
side)
Provides operation buttons, LED indicators, and a touch screen.
For details, refer to "Full Size Color UI (Optional)" (P.39).
The illustration shows the full size color UI attached on the left side of
the machine.
17
Full size color UI
(When attached on the right
side)
Provides operation buttons, LED indicators, and a touch screen.
For details, refer to "Full Size Color UI (Optional)" (P.39).
The illustration shows the full size color UI attached on the right side of
the machine.
No.
Component
Function
