Registering/Deleting/Renaming Stored Programs
187
S
tor
e
d
Pr
ogr
a
mming
6
Registering Stored Programs for Build Job
Up to 100 actions can be registered with one stored program for Build Job. Up to 40
stored programs can be registered in the machine.
The following is the procedure for registering actions with stored programs.
1
Select [Store Build Job].
2
Select a number to register a
stored program.
Note
• Once a job is stored to a
button, it cannot be
overwritten.
• Select [
] to return to the
previous screen or [
] to
move to the next screen.
3
Set the feature you want to
register.
Note
• The machine produces an audible tone while a stored program is registered.
You can change the volume of the sound that notifies of stored program registration. For information on
the settings, refer to "6 System Settings" > "Common Settings" > "Audio Tones" > "Stored
Programming Tone" in the Administrator Guide.
4
Press the <Start> button or <Clear All> button.
Note
• At the left of a stored program for Build Job on the list, the icon is displayed.
• If no name is entered for a registered stored program, the name becomes “No Name”.
For information on how to name a registered stored program, refer to "Entering/Changing a Stored
Program Name" (P.188).
Deleting Stored Programs
The following is the procedure for deleting stored programs.
1
Select [Delete].
2
Select the number to delete.
Note
• Select [
] to return to the
previous screen or [
] to
move to the next screen.
3
Select [Yes].
Yes
Deletes the stored program.
Note
• Deleted stored programs
cannot be restored.
No
Cancels deleting the stored
program.
