Fuji Xerox ApeosPort-II C3300, User Manual

Page: 84 / 635

3 Copy
82
Copy
3
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
• If the number of pages in the booklet is not a multiple of four, the remaining pages will be
output as blank pages.
1
Select [Booklet Creation].
2
Select any item.
„ Off
Booklet Creation is not applied to copies.
„ On Create Booklet
Copies are made to enable left binding or top binding.
„ On - Right Bind Create Booklet
Copies are made to enable right binding.
„ On - Do not create Booklet
You can output the copies of scanned documents as they are by specifying Fold &
Staple Options. Select this item when you do not need a document to be copied in page
order.
„ Binding Shift
Displays the [Booklet Creation-Binding Shift] screen.
Refer to "[Booklet Creation-Binding Shift] Screen" (P.82).
„ Covers
Displays the [Booklet Creation-Covers] screen.
Refer to "[Booklet Creation-Covers] Screen" (P.83).
„ Divide Output
Displays the [Booklet Creation-Divide Output ] screen.
Refer to "[Booklet Creation-Divide Output] screen" (P.83).
„ Fold & Staple Options
Displays the [Booklet Creation-Fold & Staple Options] screen.
Refer to "[Booklet Creation-Fold & Staple Options] screen." (P.83).
„ Last Page on Back Cover
The last page of the original is used as the back cover of the booklet. Select the check
box to use the last page as the back cover. When using [Divide Output] to separate
booklets, the cover will be made on the last page of the last subset.
Note • Depending on the number of pages in the original, a blank sheet may be inserted before the
last page.
[Booklet Creation-Binding Shift] Screen
You can set the value within the range from 0 to 50 mm in 1 mm increments.