Fuji Xerox ApeosPort-II C3300 User Manual Download Page 149

Page: 149 / 635

Transmission Options

147

Fa
x

Select this profile for sending documents in JBIG.

Encoding method

: JBIG

Stored Document Size : A4, B4, A3

Resolution

: Standard, Fine, Superfine (400 dpi), Superfine (600 dpi)

Note

•

When a fax is sent to a machine that does not support TIFF-J, the recipient machine will not
be able to display or print the images.

Multiple-Up (Sending Multiple Documents with Combining in 1 sheet)

You can send multiple documents with combining in 1 sheet. For example, if you

specify the number of pages to be combined as 3 sheets and load 12 sheets of

documents into the document feeder, it is stored as 4 pages. Number of pages to be

combined in 1 sheet is from 2 to 9 sheets.

Important •

If documents sizes are large after being combined, they will be split on the recipient
machine.

•

If number of pages of documents is smaller than the specified pages, scanned number of
pages will be only combined and transmitted.

Note

•

This feature is not available for some models. An optional package is necessary. For more
information, contact our Customer Support Center.

Select [Multiple-Up].

Select [On].

Use [ ] and [ ] to enter the
number of pages.

Off

Multiple-Up is not applied.

Multiple-Up is applied. Specify the number of pages in [Originals].

Summary of Contents for ApeosPort-II C3300




























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ApeosPort-II C3300

Reviews:

Related manuals for ApeosPort-II C3300

Brands by name

Popular brands

Fuji Xerox ApeosPort-II C3300, User Manual

Search results

Summary of Contents for ApeosPort-II C3300

Reviews:

Related manuals for ApeosPort-II C3300

Brands by name

Popular brands