Fuji Xerox ApeosPort-II C2200, Function Manual

Page: 70 / 137

7 Stored Programming
68
Stored Progr
a
mm
ing
7
z
No
Cancels deleting stored programs.
„ Enter/Change Name
Allows you to enter or change a registered stored program name. Select a number to
register or change a name.
Up to 18 characters are allowed for a stored program's name.
For information on the settings, refer to “Entering Text” under “Chapter 10 System Settings” in the User
Guide.
„ Assign/Change Icon
Displays the [Assign/Change Icon] screen.
Configure an icon for a registered stored program. 12 icons are available. Select a
number to assign or change an icon.
z
No Icon
No icon is assigned to the registered stored program.
z
Icon
Select an icon according to the content of the registered stored program.
Registering a Stored Program
Up to 100 actions can be registered with one stored program. Up to 40 stored programs
can be registered in the machine.
The one touch buttons M01 to M20 are provided for Stored Programming 1 to 20.
The following is the procedure for registering actions with stored programs.
1
Select [Store].
2
Select a number to register a
stored program.
Note •
Press the <Interrupt>
button to cancel the
registration.
• Once a job is stored to a
button, it cannot be
overwritten.
• Select [ ] to return to the
previous screen or [ ] to move to the next screen.
3
Set the feature you want to register.
Note • The machine produces an audible tone while a stored program is registered.
You can change the volume of the sound that notifies of stored program registration. For information on
the settings, refer to “Audio Tones” of “Common Settings” under “Chapter 10 System Settings” in the
User Guide.
4
Press the <Start> button or <Clear All> button.
If no name is entered for a registered stored program, the name becomes “No Name”.
For information on how to name a registered stored program, refer to “Enter/Change Name” (P.68).