Fuji Xerox ApeosPort-3 C4400, User Manual

Page: 168 / 341

Fa
x
4
4 Fax
166
Multiple-Up (Combining Multiple Pages into One Sheet)
This feature allows you to print multiple pages of a document onto one side of a single
sheet of paper. For example, if you have a document of 12 pages, and you select [3
Pages Up], the machine combines the scan data into 4 pages. You can specify a
multiple-up value in the range of 2 to 9.
Important • If the length of each resultant page is too long, the output data may be split on the recipient
machine.
• If number of pages of documents is smaller than the specified pages, scanned number of
pages will be only combined and transmitted.
Note • This feature is not available for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
1
Select [Multiple-Up].
2
Select [On].
„ Off
Multiple-Up is not applied.
„ On
Multiple-Up is applied. Specify the number of pages in [Originals]. Use [ ] and [ ] to
enter the number of pages.
Remote Mailbox (Using Remote Mailbox)
Remote Mailbox is a feature for sending or receiving confidential documents that you
do not want others to see.
Note • This feature is not available for Server Fax.
„ Sending to Mailbox (Fax Signal Method)
This feature allows you to send a document directly to a mailbox on the destination
machine. The document can be printed on the destination machine. To use this feature,
you need the mailbox number and passcode of the destination mailbox.
„ Private Polling (Fax Signal Method)
This feature allows you to retrieve a document from a mailbox on a remote machine by
sending a polling request from your machine. To use this feature, you need the mailbox
number and passcode of the remote mailbox.
The retrieved document is stored in a mailbox on the machine. When a document is
received in a mailbox, the <Job in Memory> indicator lights and a [Mailbox Report] is
printed. The [Mailbox Report] includes the mailbox number and name.
Important • You cannot use polling to retrieve documents from multiple remote mailboxes
simultaneously.
Note • The DTMF method is available for this feature. The supported signals are numerals, *, and
#.
For information on printing received documents, refer to "Checking Document Details" (P.245)".
Documents received in mailboxes can be automatically printed. For information on the mailbox settings,
refer to "Configuring/Starting Job Flow" (P.249).
Depending on the report print settings, a Mailbox Report may not be printed after a document is
received in a mailbox. For information on the report print settings, refer to "5 Tools" > "Common
Service Settings" > "Reports" > "Mailbox Report" in the Administrator Guide.