Fuji Electric ZKM, Service Manual

Page: 8 / 37

6
INZ-TN5A0506-E
4. SETTING OF COMMUNICATION CONDITION
In order that the master station and instrument (this instrument) can correctly communicate, following settings
are required.
• All communication condition settings of the master station are the same as those of instruments (this
instrument).
• All instruments (this instrument) connected on a line are set to “Station No.” which are different from each
other. (Any “Station No.” is not shared by more than one instrument.)
4.1 Setting item
The parameters to be set are shown in the following table.
Set them by operating keys on the screen.
Item
Factory shipment
default
Settable range Remarks
Baud rate 38400 bps Fixed (can not be changed)
Data length 8 bits Fixed (can not be changed)
Stop bit 1 bits Fixed (can not be changed)
Parity setting None Fixed (can not be changed)
Set the same communication
condition to the master station
and all slave stations.
Station No. 1
0 to 31
(0: Communication function stops ) Set a different value to each
station.
4.2 Setting operation
Set the station No. on the parameter screen. (Refer to the instruction manual)