Rail Mounting Base Models
Applicable Inverter Models
FRN002C1S-2U
FRN003C1S-2U
FRNF50C1S-4U
FRN001C1S-4U
FRN002C1S-4U
FRN003C1S-4U
FRN002C1S-7U
FRN001C1S-6U
RMA-C1-2.2
FRN001C1E-7U
FRN005C1S-2U
FRN005C1S-4U
FRN003C1S-7U
RMA-C1-3.7
3. Precautions on Usage
(1) In an environment where the FRENIC-Mini may be subjected to vibration or impact, the FRENIC-Mini installed to a din rail is
NOT
recommended.
(2) Installation of the FRENIC-Mini with a rail mounting base is allowed only when the FRENIC-Mini is installed vertically.
(3) When installing the FRENIC-Mini series of inverters together with other devices on the same din rail, keep a space of at least 10
mm(0.4 in) between components. However, as long as you are installing the FRENIC-Mini series of inverters only and the ambient
temperature is 40ºC(104ºF) or below, side-by-side installation of the inverter without a gap is possible.
4. Installation Procedure
(1) Installing
a
rail
Secure a din rail (on which you want to set up your
FRENIC-Mini) with mounting screws at intervals of
a maximum of 200 mm(8 in) 100 mm(4 in) or less
recommended).
Max. 200 mm(8 in)
Max. 200 mm(8 in)
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]
