4-6
4-1 Setting SX_MDLW
<For Ethernet>
Set “Ethernet” as the communication port type and set the connection destination IP address (IP address of PC card I/F
module) and the port number.
<Sample setting>
<For FL-net>
Set “FL-net (LAN board)” as the communication port type and set the connection destination node number (1 to 254) and
the local station node number (1 to 64).
<Sample setting>
<SX bus board>
When using SX bus slave boards, a maximum of four SX bus slave boards are available. Select the communication port
type from “SX bus board 0” through “SX bus board 3.” When one SX bus slave board is used, select “SX bus slave board
0.” Parameter settings are not necessary.
<Sample setting>
Place a 1-byte space.
IP address
Port number
Place a 1-byte space.
Connection destination
node number
Local station node number
(optional)
V
* Use of SX_MDLW enables connection
of a LAN board commercially available
to FL-net.
